11 Tips to Install Subway Tile Kitchen Backsplash

Subway tiles are the classic material used for creating backsplash in kitchens and bathrooms. If you are considering a DIY subway tile kitchen backsplash installation, this blog will offer some of the tips to ease your job. Check out the following pointers –

1. Decide on the tile material, color, pattern, and design.
2. Next, measure the area of your supposed kitchen backsplash.
3. Based on the measurement, order your tiles. Add 10% extra tiles to avoid delays caused by damages during shipment and installation.
4. Prepare the wall (or the substrate or backer board) on which the subway tiles will be installed. Make sure that it is perfectly level with no craters and bulges on it.
5. Remove electricity outlets, if there are any. Do turn off the power supply before that.
6. To install subway tiles, you have two options to get started with. First is, thin set mortar and the second is, adhesive. For a small project like kitchen backsplash, it is advisable to use tile adhesive. To be specific, you should choose a waterproof tile adhesive.
7. Spread the adhesive over the wall, and place your first tile. Use a notched trowel to achieve the professional level perfection here.
8. Using tile spacers, and repeating the step 7, finish tiling your kitchen backsplash.
9. Once, you are done with tile placement, it is time to grout the subway tiles. 
10. Use a good quality grout suitable for kitchen backsplash. Ascertain that the grout color complements the look of your tiles.
11. Let the grout dry for 24 to 48 hours as mentioned by grout manufacturer.

And there you have it. This is how you install subway tile kitchen backsplash.

Looking to buy subway tiles? Consider ShadesOfStone.com, one of the trusted stone and tile stores in US.