Tips on Installing Peel And Stick Tiles

Need to give your space a quick makeover? Consider Peel and Stick tiles. They are also available as self adhesive tiles that do not require grout or thin set for installation. You can finish the installation and refresh the look your indoor space within a couple of hours.

Here is how to install Peel and Stick Tiles –

• Clean the floor; remove dust, dirt, and debris. Wipe and dry the surface to be tiled. This will help the tiles get a good grip on the surface. The best part is, these tiles can be installed on an existing tiled or concrete floor or wall.
• Remove baseboards, if working on the floor. Remove everything that is on the floor – such as furniture, appliances, rugs, and carpets.
• And be careful the switch boards, if working on the wall. Remove nails, stickers, and everything that is on the wall.
• Make sure that surface is perfectly level. If it is not, it would be advisable to fix it. 
• Apply a coat or two of latex primer over the surface. Let it set.
• Now, take the peel the tile and apply it on the surface as per your layout idea.
• Be very careful while placing the tile, because the tiles once used cannot be reused.
• Tile the entire area.

To give it a finish, run a roller all over the freshly tiled surface. It will evenly press the tiles and help ensure that the tiles get a good grip on the surface below.

Looking to buy peel and stick tiles? Visit ShadesOfStone.com, one of the trusted tile stores in US!