Vinyl is a versatile material that you can use in any area of your home, including the flooring of your kitchen and bathroom. The best part of vinyl tiles is, they are super easy to install.
You do not need to prepare a fresh subfloor to lay vinyl floor. If you have a tiled floor, which is in good condition, you can install vinyl floor over your existing tile flooring. In this article, we give you some of the useful tips and tricks to help you install self adhesive vinyl tiles on your existing tile flooring. check out the following pointers –
- Clean your existing tile flooring as much as you can. Apply elbow grease to remove all the dust and dirt from the floor. Thoroughly wash and wipe the floor. And allow it to dry completely.
- Fix the bumps and holes, if any, on the floor. Fill thin set or cement-sand mixture into the hole. The swollen areas should be leveled up. Let these changes set and dry too.
- Now we are ready to place the first line of vinyl tiles.
- Choose the last wall in your room, and find its center on the floor. That’s where you will place your first tile. Now, apply vinyl tiles one by one in left and right directions of this first tile and complete the first line of tiles.
- Finish the entire floor this way.
Cut the tiles carefully using a sharp vinyl cutter. Mark the cut lines on the back side of the tile. And most importantly, cut the tiles with their paper backing on. This will ease your job a great deal.
And you have finished installing vinyl tiles on your floor tile.
If you are looking to buy vinyl tiles, consider ShadesOfStone.com, one of the trusted tile stores in US.
Comments
Post a Comment