How to Replace Old Countertop without Damaging Vanity

There are times when you have to replace the counter stone on your vanity. This is a small renovation project, but you will need to work this job carefully to avoid ruining your vanity. In this blog, we will give you a few useful tips on replacing your old stone counter with new stone without damaging the vanity. Check out the following pointers –

• Do the preparations first. This will involve gathering the essential tools such as – wrench, level, utility knife, chisel, hammer, plumber’s putty, painter’s tape, tape measure, screw gun, supply lines, caulk gun, silicone caulk, and stone. You will also need a cloth pieces to manage and clean the mess.
• Close water supply to the vanity. And now, it is time to remove the faucets and drains.
• Use your knife to break and remove caulk seal around the vanity. Tap it gently to lose its grip from the wall. If the counter is attached with the body of the vanity, you will need to use chisel and hammer to remove the stone.
• Install the sink and faucets before the counter stone. To do that precisely, you will need to refer the installation manual or discuss the process with your supplier or someone experience at this.
• Now, apply silicone caulk on the top edges of the vanity. Ensure the level.
• Place new stone counter and side splashes with the help of caulk. Let it settle.
• To finish the project, reconnect the plumbing supply. And you are now ready to use your vanity.

Looking to buy stone the counter for your vanity or buy vanity? Visit ShadesOfStone.com, one of the trusted stone tile stores in US.